Hyundai ix35 engine specialists • Dandenong, Melbourne

Hyundai ix35 Engine for Sale — Reconditioned, Tested & Warranty Backed

Reconditioned Hyundai ix35 engines (G4NC, G4KD, G4KE, G4KJ) priced openly from $4,200 on a changeover basis. Stripped, rebuilt with new wear components and tested in our Dandenong workshop, with a 12-month product warranty. Delivered Australia-wide to your door or your mechanic, or supplied and fitted by us.

From $4,200Supply only, changeover basis
12 monthsProduct warranty on every engine
2–3 daysTypical fitting once the engine is on hand
Australia-widePallet freight to your door or your mechanic
Current range

Hyundai ix35 engines for sale

Supply-only prices on a changeover basis. Every engine is inspected and tested before dispatch. Send us your VIN before ordering and we confirm the fitment.

EngineCodeTypeYearsStockPrice
Hyundai ix35 engineG4NC2.0L GDI petrolConfirm by VINIn stock$4,200View engine →
Hyundai ix35 engineG4KD2.0L petrolConfirm by VINIn stock$4,200View engine →
Hyundai ix35 engineG4KE2.4L petrolConfirm by VINIn stock$4,200View engine →
Hyundai ix35 engineG4KJ2.4L GDI petrolConfirm by VINIn stock$4,500View engine →

Engine not listed? We rebuild most Hyundai ix35 engines to order. Call with the VIN. See all Hyundai engines for sale or Kia engines for sale.

The Hyundai ix35 (LM, 2010–2015) is one of the most common SUVs we see in the workshop, and its four petrol engines are all well-known to us. The Series I cars run the Theta II G4KD 2.0L and G4KE 2.4L; the Series II update moved to the direct-injection Nu G4NC 2.0L GDI and Theta II G4KJ 2.4L GDI. Every one of them comes to us for the same reasons: oil consumption, bottom-end knock, timing chain stretch and, on the GDI engines, carbon build-up.

We keep reconditioned engines for all four codes. Each engine is stripped, measured, machined where needed, rebuilt with new wear components, then compression and leak-down tested before it leaves. You get a tested engine with a 12-month product warranty instead of a used engine with unknown history.

From the workshop

Hyundai ix35 engines we have rebuilt and fitted

Photos from our Dandenong workshop, not stock images.

Identify your engine

Which engine is in my Hyundai ix35?

The engine code is on the build plate under the bonnet and stamped on the block. Years are a guide; the VIN confirms it.

SeriesVariantEngineAvailability
ix35 LM Series I, 2010–2013Active, Elite 2.0L petrolG4KD 2.0L MPI (Theta II)Reconditioned, in stock
ix35 LM Series I, 2010–2013Highlander 2.4L petrolG4KE 2.4L MPI (Theta II)Reconditioned, in stock
ix35 LM Series II, 2013–2015Active, Elite 2.0L petrolG4NC 2.0L GDI (Nu)Reconditioned, in stock
ix35 LM Series II, 2013–2015Highlander, Trophy 2.4L petrolG4KJ 2.4L GDI (Theta II)Reconditioned, in stock
ix35 LM, 2010–20152.0 CRDi dieselD4HA 2.0L CRDiReconditioned, in stock – $7,000

Not sure? Our Hyundai and Kia engine codes guide shows where to look, or send us the rego and we check it.

What you get

How we recondition a Hyundai ix35 engine

Reconditioned means rebuilt and tested, not cleaned and resold. This is the process every engine on this page goes through.

  1. Strip and inspectThe engine is fully dismantled, cleaned and measured. Cracked blocks and heads are rejected, not repaired.
  2. MachineBores honed or re-sleeved, crank ground or polished, head faced and pressure tested, valves and seats cut.
  3. New wear componentsBearings, rings, seals, gaskets, timing chain, guides and tensioner replaced with new parts. Oil pump and water pump checked or replaced.
  4. Assemble to specBuilt to factory clearances and torque settings by technicians who only work on Hyundai and Kia engines.
  5. TestCompression and leak-down tested before dispatch, so the engine leaves proven, not assumed.
  6. Warranty and support12-month product warranty, with fitment and installation advice for your mechanic by phone.

The engine is supplied as a long engine: block, crank, rods, pistons, head and timing components. Alternator, starter, manifolds, turbo (where fitted) and sensors transfer from your old engine. Read reconditioned vs second-hand engines and what the warranty covers.

Two ways to buy

Supply only, or supplied and fitted

Supply only

  • The listed price, delivered on a pallet to you or your mechanic anywhere in Australia
  • Changeover basis: your old engine comes back as the core
  • 12-month product warranty
  • Fitment confirmed against your VIN before dispatch

Supplied and fitted in Dandenong

  • Quoted against your VIN before any work starts
  • Most ix35 jobs land between $4,800 and $6,500 supplied and fitted
  • Old engine out, ancillaries transferred, fluids, road test
  • Typically two to three days once the engine is on hand
How supply and fit works →
Before you buy

Is it the engine? Hyundai ix35 engine problems

The ix35’s petrol engines fail in well-documented ways, and the symptoms are consistent: rising oil consumption between services, a knock from the bottom end on cold start, a rattle from the timing chain, and misfires or rough idle from carbon on the intake valves of the GDI engines. If the knock is there, the bearings are already damaged and a rebuilt engine is the economical fix.

Read the full guide: Common Hyundai ix35 engine problems.

Why Hyun Engines

Hyundai ix35 engines from a Hyundai and Kia specialist

We only do Hyundai and Kia

  • More than ten years rebuilding Nu, Theta II, Gamma and D4CB engines in Dandenong
  • We know which ix35 engine your car has from the VIN, and which parts fail on it
  • Engines supplied to private owners, independent workshops, dealers and fleets across Australia
  • Honest advice: if a repair is cheaper than an engine we will tell you

Delivery and fitting

  • Pallet freight to Melbourne, Sydney, Brisbane, Adelaide, Perth, Canberra, Hobart and regional depots
  • Engines are strapped to a pallet and wrapped for transport; we deliver Australia-wide
  • Fitting at our Dandenong workshop, usually two to three days
  • Phone support for your mechanic during installation
Common questions

Hyundai ix35 engine FAQs

How much is a Hyundai ix35 engine?

Our reconditioned ix35 engines are $4,200 for the G4KD, G4KE and G4NC and $4,500 for the G4KJ 2.4 GDI, supply only on a changeover basis. Supplied and fitted at our Dandenong workshop most ix35 jobs land between $4,800 and $6,500 depending on the engine and which ancillaries carry over. We quote against your VIN before any work starts.

Which engine does my ix35 have?

Series I (2010–2013) 2.0L cars have the G4KD and 2.4L cars the G4KE. Series II (2013–2015) moved to the G4NC 2.0 GDI and G4KJ 2.4 GDI. The code is stamped on the block near the gearbox and shown on the build plate. Send us the VIN or rego and we confirm it.

Is a reconditioned ix35 engine better than a used one?

A used engine from a wrecker is the same engine with the same wear and the same bearing design, with no history. A reconditioned engine has new bearings, rings, seals, gaskets and timing components and has been tested. For an engine family with a known bottom-end weakness that difference matters.

What is covered by the 12-month warranty?

The reconditioned engine itself: block, head, rotating assembly and the new components fitted during the rebuild. Read our warranty explainer for the conditions, including correct installation and oil changes.

Do you deliver ix35 engines interstate?

Yes. Supply-only engines go Australia-wide on a pallet to your door, your mechanic or a freight depot. Fitting is at our workshop in Dandenong, Melbourne.

Get moving

Need a Hyundai ix35 engine sorted this week?

Call with your rego or VIN — we confirm the engine, the price and freight or the booking in one conversation.

Call 03 9630 0960 Get a quote